[ Introducing a compact rally chassis with shaft 4WD ] This is a compact electric RC car chassis assembly kit with a motor mounted in the front mid and power transmitted to the front and rear wheels via a propeller shaft from the spur gear in the center of the body.

The main frame has a layout in which the battery is rotated 90 degrees to the left side and placed vertically, with heavy objects placed in the center.
Three different wheelbases can be selected by rear section rearrangement.

The suspension is a 4-wheel independent double wishbone with aluminum oil dampers.

The front caster angle is set to 5 degrees, and hub carriers/uprights are available with two different vehicle height options.
The front bumper has a skid angle to reduce interference with the road surface.

[Items to be purchased separately (not included)] Body, motor, tires, RC mechanism: 2-channel radio control set (transmitter, receiver, ESC, low-profile servo recommended), running battery, charger, power supply for transmitter, etc. Product introduction [Introducing a compact rally chassis with shaft 4WD] This is a compact-sized electric RC car chassis assembly kit with a motor mounted in the front mid and power transmitted to the front and rear wheels by a propeller shaft from the spur gear in the center of the body.
The main frame has a layout in which the battery is rotated 90 degrees to the left side and placed vertically, with heavy objects placed in the center.
Three different wheelbases can be selected by rear section rearrangement.
The suspension is a 4-wheel independent double wishbone with aluminum oil dampers.
The front caster angle is set to 5 degrees, and hub carriers/uprights are available with two different vehicle height options.
In addition, the front bumper has a skid angle to reduce interference with the road surface.
[Main equipment parts] Front and rear oil-filled gear differentials (2 x 39T, 1 x 40T)
Front and rear universal drive shafts
Front and rear aluminum oil dampers (touring car size)
Height selectable hub carrier, upright
Turnbuckle Upper Arm
Full bearing specifications
High torque servo saver (black)
Polycarbonate chassis cover
[Basic specifications] Chassis length 308mm (when wheelbase is 225mm)
Chassis width 165mm
Three wheelbase types are available: 210mm, 225mm, and 239mm.
Frame = Bathtub type
Drive system: Front midship motor, shaft drive 4WD
Differential gear = Oil-filled gear differentials on both front and rear
Steering: 3-piece tie rod type
Suspension: 4-wheel double wishbone
Damper = Aluminum cylinder oil damper
Gear ratio = 8.27:1 when using the 22T pinion included in the kit (13 different gear ratios from 10.71:1 to 6.28:1 can be selected in combination with the separately sold pinion)
Speed controller = ESC specification (sold separately)
[Items to be purchased separately (not included)] Body for M chassis
540 type motor
tire
RC mechanism: 2-channel radio control set (transmitter, receiver, ESC, low-profile servo recommended)
Running battery, charger
Transmitter power supply
*This product requires a power source to operate, but batteries, chargers, etc. are not included.
In addition, the body, motor, tires, transmitter, RC mechanism, etc. are not included.
Additional parts must be purchased, assembled, and painted before it can be driven.
*This product does not use fuel.
*Fuel is not included in this product.
*This product does not include paints, adhesives, oils, grease, tools, etc.
Safety warning: Do not use for any purpose other than its intended use.

Dimensions: ‎31 x 17 x 10 cm


Tags:

Tamiya  Car  Radio-controlled car  Radio control  Radio-controlled model  Monster truck  Tamiya Monster Beetle Trail GF-01TR  車  Tamiya M Chassis Rally Block Tires 51427  Tamiya XM-01 PRO Chassis Kit 58738