This is an upgraded version of the Hornet, which first appeared in 1984 and created a boom in 2WD off-road RC cars, with improved chassis performance.

While maintaining the basic structure of the bathtub-type frame, the suspension has been strengthened.
Equipped with a sealed gearbox that keeps out sand and pebbles that are common when driving off-road.
It also has a built-in 3-bevel gear type differential gear that produces smooth cornering.

The body is made of lightweight, shock-resistant polycarbonate.
Orange/yellow fire pattern, logo and bib stickers are available.

Overall length: 430mm, overall width: 230mm, overall height: 135mm
[Items to be purchased separately (not included)] Finespec 2.4G electric RC drive set, 4 AA batteries for transmitter Product introduction This is an upgraded version of the Hornet, which was introduced in 1984 and created a boom in 2WD off-road RC cars, with improved chassis performance.
Overall length: 430mm, overall width: 230mm, overall height: 135mm
While maintaining the basic structure of the bathtub-type frame, the suspension has been strengthened.
Equipped with a sealed gearbox that keeps out sand and pebbles that are common when driving off-road.
It also has a built-in 3-bevel gear type differential gear that produces smooth cornering.
The wheels are three-piece, prefabricated types with a three-dimensional appearance.
The front wheels are equipped with grooved tires with excellent directional characteristics, and the rear wheels are equipped with high-grip studded tires.
The body is made of lightweight, shock-resistant polycarbonate.
Orange/yellow fire pattern, logo and bib stickers are available.
Lightweight and well-balanced chassis configuration: Slim ABS resin bathtub frame with the battery mounted vertically at a low center position and the RC mechanism mounted above it
Well-balanced and easy to maintain
Four-wheel independent suspension with excellent off-road performance: Equipped with CVA oil dampers on both front and rear, double wishbone type with turnbuckle shafts on the upper arms
The camber angle can also be adjusted, allowing for smooth driving even on rough off-road surfaces.
Simple rear-wheel drive, with the motor mounted at the rear end and a sealed gear case housing a differential gear
The drive shaft is a standard dogbone type, which is highly reliable.
Full bearing specifications
Extensive optional parts: You can tune up your car by installing optional parts such as higher performance oil dampers and ball differentials.
[Items to be purchased separately (not included)] Finespec 2.4G electric RC drive set
Transmitter AA batteries: 4
*This product requires a power source to operate, but batteries, chargers, etc. are not included.
In addition, transmitter, RC mechanism, etc. are not included.
Additional parts must be purchased, assembled, and painted before it can be driven.
*This product does not use fuel.
*Fuel is not included in this product.
*This product does not include paints, adhesives, oils, grease, tools, etc.
Safety warning: Please run the car in a large, safe place such as a dedicated RC car circuit.
Never run it on the road
Do not run in crowded areas, parks or near small children.
Do not run in narrow spaces or indoors.
Please do not ride in places where it may cause a nuisance to others, such as schools, hospitals, or residential areas.
Do not run at night or early in the morning



Tags:

Tamiya  Car  Tamiya Corporation  Radio-controlled car  Radio control  Radio-controlled model  Tamiya The Hornet  Truggy  Tamiya 1/10 RC Hornet EVO  ホーネット