This electric radio-controlled car assembly kit features a humorous version of the Honda City Turbo race car that was released in 1983.

The body is made of impact-resistant resin with sharp engravings
A driver figure wearing a helmet is also included to enhance the fun of driving.

It also comes with red and blue graphics to accentuate the body, a number plate, and stickers for the paint lines on the driver figure's helmet.

The chassis is the compact rear-wheel drive WR-02C
The tires have an asymmetric tread pattern and are different widths at the front and rear, creating a racing atmosphere.

Total length: 345mm, total width: 210mm, total height: 165mm

[Product introduction]
This electric radio control car assembly kit features a humorous version of the Honda City Turbo race car that was released in 1983.

The body is made of impact-resistant resin with sharp engravings
A driver figure wearing a helmet is also included to enhance the fun of driving.

It also comes with red and blue graphics to accentuate the body, a number plate, and stickers for the paint lines on the driver figure's helmet.

The chassis is the compact rear-wheel drive WR-02C
The tires have an asymmetric tread pattern and are different widths at the front and rear, creating a racing atmosphere.

[Uses rear-wheel drive WR-02C chassis]
The chassis is the rear-wheel drive WR-02C with a wheelbase of 185mm.

A monocoque frame is used to clamp the gear case, and side members are attached to the outside to increase rigidity.

The motor is mounted almost in the center of the chassis, and power is transmitted to the rear wheels via gears.

The sealed gear case has a built-in differential gear.

And the key point is that the driving battery is placed vertically at the rear of the vehicle.

By mounting the heavy objects high up, dynamic wheelies can be performed simply by accelerating quickly.

The rear is also equipped with a wheelie support with rollers to prevent tipping oVer.The steering servo is set on the center line of the chassis.

The use of an equal length two-piece tie rod creates smooth handling characteristics.

The suspension is a four-wheel double wishbone with excellent off-road performance.

The gearbox is pre-assembled with the motor attached, making it easy to build.

[Basic specifications]
Total length: 345mm, total width: 210mm, total height: 165mm
Wheelbase 185mm
Track: Front 165mm, Rear 170mm
Tire width/diameter: Front 35/70mm, Rear 42/70mm
Frame: Resin monocoque type
Drive system: Rear-wheel drive
Suspension = Double wishbone 4-wheel independent
Damper = Friction both front and rear
Steering tie rod = 2 pieces
Differential gear system: 3 bevel differential
Gear ratio = 1:16.5
Motor = Torque tune
Speed controller = ESC specification (sold separately)
[Items to be purchased separately (not included with this product)]
Finespec 2.4G electric RC drive set, 4 AA batteries for transmitter
The photo shows the kit assembled and painted.
* This product requires a power source to operate, but batteries, chargers, etc. are not included.

In addition, transmitter, RC mechanism, etc. are not included.

Additional parts must be purchased, assembled, and painted before it can be driven.
* This product does not use fuel.
* Fuel is not included in this product.
* This product does not include paints, adhesives, oils, grease, tools, etc.

[Safety warning]
Please run the car in a large, safe place such as a dedicated RC car circuit.

Never run it on the road
Do not run in crowded areas, parks or near small children.

Do not run in narrow spaces or indoors.

Please do not ride in places where it may cause a nuisance to others, such as schools, hospitals, or residential areas.

Do not run at night or early in the morning

Dimension: ‎35 x 21 x 17 cm


Tags:

Cars