The assembled chassis is a shaft drive 4WD TT-02 with excellent steering stability due to a well-balanced layout with the driving battery on the left and the motor on the right.
4-wheel independent double wishbone suspension
The front and rear sealed gearboxes have built-in resin 4-pinion type differential gears that produce smooth differentials.

The wheel hub has a brake disc-like design and is equipped with a front bumper support that resembles the bumper of an actual racing kart.
Two types of wheelbase, vehicle height, and tread can be selected by rearranging parts, and settings such as a motor mount that can select a wide range of 10 gear ratios are also OK.

[Using a 2.4G radio that can be easily played with multiple units] In addition to the complete car, a wheel trigger type transmitter that is ideal for car control, a 7.2V battery for driving, and a charger are also included.
The RC mechanism uses a 2.4GHz radio set that can be easily enjoyed with multiple units without the need for band adjustments such as crystal replacement.

2.4GHz, which is also used for computer wireless LAN, has a one-to-one correspondence between the transmitter and receiver (vehicle), so there is no need to worry about interference, and the transmitter and receiver are already paired. No need for troublesome setup work
In addition, the transmitter adopts a grip cover and a trigger cover.

[Basic specs] Length: 426mm, Width: 188mm, Height: 131mm, Wheelbase: 257mm, Motor: 540 type, Equipped with ESC that enables smooth speed adjustment both forward and backward.
[Items to be purchased separately (not included in the product)] AA batteries for the transmitter: 4 pieces Product introduction The SUBARU BRZ, which was released in 2012 as the first rear-wheel-drive sports car of SUBARU and attracted a lot of attention.
It is a complete electric radio control car of SUBARU BRZ (ZD8), the 2nd generation model announced in Japan in April 2021.
While inheriting the basic style of the 2-door coupe, the dynamic form with improved aerodynamics such as opening air outlets in the front fender and equipped with a side sill spoiler is realistically reproduced with polycarbonate.
The main body is metallic blue, the windows are smoked, and the front grille and lower part of the rear bumper are painted black.
In addition, the headlights, front grille, and air intakes on both sides of the bumper are finished with stickers.
A 2.4G transmitter with little interference, a battery for driving and a charger are also included.
[Items to be purchased separately (not included in the product)] AA batteries for transmitter: 4
Only use the specified charging equipment to charge the battery.
The battery charger that can be used differs depending on the type and capacity of the battery.
Use of non-designated charging equipment may cause heat generation, fire, or explosion, which is very dangerous.
Be sure to charge the battery in a place where there is nothing within sight.
*This product does not use fuel.
*Fuel is not included in this product.
*Paint is not included in this product.
*This product does not include adhesive.
Safety warning Please drive in a wide and safe place such as a circuit dedicated to RC cars.
Never run on the road
Do not run in crowded places, parks, or near small children.
Do not run in narrow spaces or indoors
Do not run in places where other people may be disturbed, such as schools, hospitals, and residences.
Do not run at night or early in the morning

Dimensions : ‎43 x 19 x 14 cm


Tags:

Tamiya  Blue  Car  Radio-controlled car  Toyota 86  TT-02  Tamiya TT-01  Chassis  Subaru BRZ (ZD8) (TT-02 Chassis) (RC Model)  車  Tamiya 1/10 R/C Subaru BRZ