Released in May 2024
FUJIMI 1/700 Special Series No. 21 Japanese Navy Aircraft Carrier Taiho (wooden deck). Toku 21 Japanese Kaigunkou Bokan Released in May 2024
[Product Introduction]
FUJIMI 1/700 Special Series No. 21 Japanese Navy Aircraft Carrier Taiho (wooden deck). New parts have been added to the enclosed type bow, chimney integrated with the bridge, and armored aircraft carrier Taiho! The product is an unpainted kit that requires adhesive assembly and painting. The scale is 1/700, and it is an offshore model that does not include the bottom of the ship. This product consists of a conventional (special series) mold and newly designed additional parts. -The motif of the product is the appearance from the time of completion to the time of the Battle of the Marianas.・The flight deck, which has various theories, is a specification that includes special parts engraved with a wooden deck motif. - Newly designed parts have been prepared to unify differences in reproducibility of equipment etc. depending on product release date, and some are divided to take painting work into consideration - No. 21 electric probe has conventional parts such as the insulator base for fixing elements on the front It is expressed with a more delicate sculpture than the included parts.・The canvas and wheelhouse/machine room canopy are separate parts for the 12-meter fireboat in consideration of painting. Specification to perform each painting and assembly and gluing later.・With a 3-part structure, the boat body and the floor of the loading area are separate parts, and can be assembled after painting, eliminating the need for masking.・The shape of the 12 meter internal fire lunch can also be expressed without a canvas. -New chrysanthemum emblem on the bow of the ship. -One pair of sidelights, which have been omitted from modeling, are available as additional parts. -Added a decal that includes the stern ship name (warship color filled tone).・The Type 96 25mm triple machine gun now has a two-part configuration that reduces painting/separation work. -Four models based on historical facts (Zero Fighter Type 52, Type 21 (explosion), Comet, and Tenzan are included.-Binocular telescope parts have been added to the air defense command center.-The 9-meter cutter has been made into two parts considering painting, Separate parts are available for the mount, and it can be selected as an integrated mold for the deck. - The mount for the ship has an uneven shape and light holes, giving it a more precise feel. Since it is a service part, there is no need to actively describe it. -The hull has a structure where the port and starboard sides are integrated, so there is no need to glue or erase the seams. - Reproduction parts are also available for the sealed anchor chain deck, and the inside can be seen from the opening. Specifications that allow you to see. - The portholes are expressed with concave carvings on the side, and the eaves are also reproduced with convex carvings. - The flight deck is carved with a wooden deck, and is molded in one part from the bow to the stern. Configuration: - The elevator can be assembled either in the raised state or in the lowered state to the hangar. - The truss structure on the aft side of the flight deck and the back side are expressed as three-dimensional sculptures. is in the retracted state, and the crane is in the upright state. - The base of the bridge is a one-piece molded part with carvings on five sides. - The chimney that is integrated with the bridge is a left and right split part. The waste pipes and pillars are detailed with separate parts. - The funnel cap is ``released'' and has a sense of precision. - The bridge (air defense command center) includes binocular telescope parts that increase the sense of precision. The high-angle gun turret, machine gun turret, etc. are made into separate parts, and the strip pattern on the floor is expressed with detailed engraving. - One of the features, the 10 cm long high-angle gun, is prepared as a special part for the Taiho. A variety of different parts are included for the side equipment such as the radio antenna support, landing guidance light, and rattle.・The 25mm triple machine gun is a two-part type with a structure that is easy to mold and paint separately, and the mold parts will be released in 2018. Standard inclusion. - Four types of carrier-based aircraft from the Battle of the Mariana Sea in June 1944, a total of 16 aircraft are included. - Four Type 52 Zero carrier-based fighters are included, and the windshield and propeller are separate due to painting. Specifications made into parts. - Four Type 0 carrier-based fighters (explosion) are included, and the tank on both wings and the 250kg bomb under the fuselage are reproduced as separate parts. Type 11 that reproduces the unique shape of the aircraft equipped with a liquid-cooled engine.Four Tenzan carrier-based attack aircraft are included, and the characteristic 4-winged propeller and the suspended 250kg bomb under the fuselage are made into separate parts.・The high-angle gun emplacement on the side, the machine gun mount, etc. are made into separate parts, and the strip pattern on the floor is expressed with detailed carvings.・15 aircraft are included, Zero Fighter Type 21/99 Kanbaku/9. Five ships of the Seven Battleships are included, and the molding color is gray. -The molding color is gray for the main parts, ship bottom plate, carrier aircraft, machine gun parts, etc. There are 3 types of decals included, and 1 decal for marking the carrier aircraft is included. -One decal for the stern ship name and the white line of the support is included.・One Taiho decal with flight deck markings and military flag is included
[Included contents] Runner x41・Assembly manual x1・Decal x3
[Product specifications]
1 /700 scale unpainted assembly kit□