배송 및 반품
Europe, UK: Friday, May 8 ~
USA: Wednesday, May 6 ~
Australia: Friday, May 8 ~
Asia: Thursday, May 7 ~
UAE: Thursday, May 7 ~
Order within 10 Hours 34 mins with Scheduled Delivery. If you place an order within this time, We will ship Wednesday, May 6 2026. This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
USA: Wednesday, May 6 ~
Australia: Friday, May 8 ~
Asia: Thursday, May 7 ~
UAE: Thursday, May 7 ~
Order within 10 Hours 34 mins with Scheduled Delivery. If you place an order within this time, We will ship Wednesday, May 6 2026. This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
구매자 보호
Full refund if not genuine. Full or partial refund, if the new item is not as described.
커스터머 리뷰 (0 rating)
현재 상품리뷰가 없습니다....
상품설명 (2,378 characters)
Assembling is an inset type that does not require adhesive
Separate tools are required to install the parts
Completed size: total length 154 mm, total width 88 mm
Gear ratio set to 4: 1 with double shaft motor
Equipped with a small wing on the nose and vertical fins on the rear of the cockpit, while retaining the image of Avante, which was very popular with RC cars and Mini 4WD.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Evolved form of running, appearing] A plastic model assembly kit for a four-wheel drive racer with high-performance running and fun racing. Avante Mk.II is an image of Avante that gained great popularity in RC cars and Mini 4WD. The nose is equipped with a small wing and the rear part of the cockpit is equipped with vertical fins. The side pontoon is also characterized by an edgy form. The chassis is a double shaft motor with the shafts on both ends of the motor extended. Is mounted in the center of the car body to achieve high drive efficiency. It consists of 3 parts, nose, center, and tail, and can be attached and detached with one touch. You can enjoy a wide range of setting changes speedily. The gear ratio is set to 4: 1. Assembling is a fitting type that does not require adhesive, and there is no need for wiring just by setting the metal fittings. Of course, you can enjoy performance improvement and setting with abundant parts. [MS chassis] The 3-split "MS chassis"
that achieves excellent rigidity is a mini with a "midship (MS) layout"
in which heavy parts such as a double shaft motor and battery with the shafts at both ends of the motor are extended in the center of the chassis. 4WD's traditional 4WD (four-wheel drive) mechanism provides excellent stability even at high speeds. The chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. Speedy and wide range of setting changes * There are two types of nose units. [Basic specifications]
・ Overall length 154mm
・ Overall width 88mm
・ With double shaft motor [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.4 x 8.8 x 4.5 cm
Tags:
Separate tools are required to install the parts
Completed size: total length 154 mm, total width 88 mm
Gear ratio set to 4: 1 with double shaft motor
Equipped with a small wing on the nose and vertical fins on the rear of the cockpit, while retaining the image of Avante, which was very popular with RC cars and Mini 4WD.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Evolved form of running, appearing] A plastic model assembly kit for a four-wheel drive racer with high-performance running and fun racing. Avante Mk.II is an image of Avante that gained great popularity in RC cars and Mini 4WD. The nose is equipped with a small wing and the rear part of the cockpit is equipped with vertical fins. The side pontoon is also characterized by an edgy form. The chassis is a double shaft motor with the shafts on both ends of the motor extended. Is mounted in the center of the car body to achieve high drive efficiency. It consists of 3 parts, nose, center, and tail, and can be attached and detached with one touch. You can enjoy a wide range of setting changes speedily. The gear ratio is set to 4: 1. Assembling is a fitting type that does not require adhesive, and there is no need for wiring just by setting the metal fittings. Of course, you can enjoy performance improvement and setting with abundant parts. [MS chassis] The 3-split "MS chassis"
that achieves excellent rigidity is a mini with a "midship (MS) layout"
in which heavy parts such as a double shaft motor and battery with the shafts at both ends of the motor are extended in the center of the chassis. 4WD's traditional 4WD (four-wheel drive) mechanism provides excellent stability even at high speeds. The chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. Speedy and wide range of setting changes * There are two types of nose units. [Basic specifications]
・ Overall length 154mm
・ Overall width 88mm
・ With double shaft motor [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.4 x 8.8 x 4.5 cm
Tags:
![Shimano 26 Calcutta Conquest DC 200HG RIGHT Right-Handed (2026 Model) Baitcasting Reel /(5) [Σ01]](resources/upload/products/thumbnail/f-marunishi_4969363048738_i_20260117182227.jpg)
