Plastic model kit that needs to be assembled
Separate tools are required

With multicolor molding, you can enjoy painting etc. to your liking

Snap fit, no glue required

Product introduction 1/12 scale snap-fit type Super Cub The latest shape after minor changes can be reproduced! The product is a kit format that requires assembly
1/12 scale
No painting required: Each part is colored with a molding color, and the body realizes a glossy texture that can not be obtained by painting
No glue required: Designed to fit parts together for easy assembly
The product is based on the current Super Cub C110, which was launched in 2018.
Two types of brake lamps can be selected / manufactured: the initial type and the brake lamp that complies with the revision of the regulations in May 2020.
Accurately reproduces the large number of moving parts unique to 1/12 scale and detailed modeling
The body uses a special molding material to reproduce a level of luster that is difficult to express by painting.
The molding color consists of 9 types: blue, white, gloss silver, silver, black, ivory, clear red, clear orange, and clear.
Visual that looks like it is painted separately by colored parts even in straight assembly, parts division that greatly reduces masking work even in the case of painting
・ Body is a two-piece structure with left and right alignment
-The leg shield is integrally molded and designed to be easily press-fitted to the body.
-The front fender integrates parts while accurately reproducing the modeling with a slide mold.
-The side cover is made into a separate part from the body, and the complicated shape composed of curves and straight lines is accurately three-dimensionalized.
-The handle is shaped to be sandwiched between the bodies, and the left and right grip switches are also firmly modeled.
-The meter panel is represented by the attached sticker, and the panel cover is fitted with clear special parts for a realistic finish.
-The mirror has a very fine injection design for the stay in order to create the atmosphere of the actual vehicle as much as possible.
-Reproduced with an accurate shape and parts for each brake lever that is a different color from the handle
・ For headlights, lenses are prepared with clear parts, and the internal shape is also expressed with delicate engraving.
-The engine has a three-dimensional representation of the external shape with a three-part configuration divided into left and right and front parts.
-The change pedal is a one-piece part that accurately reproduces the bar cross section and pedal shape.
-The muffler has a 3-piece structure that reproduces both the reproduction of the exhaust port and the conical shape.
-The hook inside the leg shield, which is also a feature of Super Cub, can be easily sealed or adhesive bonus parts can be used for selection.
・ The stand is a separate part and is movable.
It is also possible to park the bicycle
・ The side stand is a separate part and can be moved.
It is possible to tilt the body and put it in a parked state
-The seat has a two-piece structure divided in the same part as the color tone, and it is a movable type that can be flipped up.
-Reproduces the refueling port flat when the seat is open
・ Metallic wheel seals are available for the name decals on both sides of the fuel tank.
・ The rear carrier uses a slide mold and is an integrated part.
・ Brake lamps can be selected from two types: a horizontally long type after the revision of the 2020 law and a vertically long type from the time of release.
・ The rear seats of the actual vehicle optional parts are recorded as bonus parts.
You can choose to wear
-The hub in the center of the wheel is a one-piece part that reproduces the surrounding shape with a slide mold.
・ The tires are made of rubber, which is specially used for this product.
Accurately reproduce the difference in width between the front and back
The size at the time of completion is (approx.) Overall length 165 x overall width 77 x overall height 109 mm
Number of assembled parts 111 points [Included contents]
・ Runner X18
・ Rubber material tire X2
・ Assembly manual X1
・ Seal X1 * This product is made in Japan
* This product is a plastic model kit that requires assembly.
No safety warning
Dimension: 33 x 21 x 7 cm