Plastic model that requires assembly and painting
Adhesives, tools, paints, etc. are required separately.

1/12 scale unpainted plastic assembly kit
Completion size: total length 176mm, total width 67mm, total height 98mm
The four wings attached to the front cowl, the seat cowl with tunnel-shaped openings on the left and right, the silencer integrated with the under cowl shape, etc. are realistically reproduced.
The red gradation pattern of the side cowl and the carbon ground have slide marks Product introduction The Superleggera V4 was announced in February 2020 as the best model that can be driven on public roads in the history of Ducati.
Thorough pursuit of weight reduction based on the company's super sports, Panigale V4
Starting with the cowl, the frame, swing arm, and wheels are also made of carbon.
The engine is a 998cc V-type 4-cylinder that uses the "Desmodromic valve timing system".
A maximum output of 234 horsepower is demonstrated by installing an exhaust made by Akrapovic for the circuit.
In addition, the carbon aerodynamic parts "biplane wing"
attached to the front cowl, which is also a style feature, generates 50kg of downforce at 270km/h.
It is a premium bike limited to 500 units in the world, assembled by skilled craftsmen with the technology that Ducati has.
Model details Length: 176mm, Width: 67mm, Height: 98mm V-type 4-cylinder engine, swing arm, front fork, side cowl, and fuel tank are fixed to the frame with screws.
The four wings attached to the front cowl, the seat cowl with tunnel-shaped openings on the left and right, the silencer integrated with the under cowl shape, etc. are realistically reproduced.
The chain is divided into left and right parts, and even the roller part is three-dimensionally expressed.
Specifications that enhance the sense of precision around the rear
Inlet mark is used on the side mirror surface
Slide marks are available for the side cowl's red gradation pattern and carbon ground.
Tires are made of textured synthetic rubber with sculpted tread patterns
Pirelli tire mark is also set
*This product is a plastic model that requires assembly and painting.
* Separate adhesives, tools, paints, etc. are required for assembly and painting.
* "Plastic model"
is a registered trademark owned by the Japan Plastic Model Industry Cooperative.
* This product does not include adhesives, paints, tools, batteries, etc.
Safety Warning N/A
Dimensions : ‎17.6 x 35 x 9.8 cm