plastic model
[Scale] 1/24
Product introduction Dress up CR-Z (ZF1) with MUGEN genuine custom parts! The product is a kit format that requires assembly and painting.
It is 1/24 scale
Custom specification with special parts such as infinite aero parts attached to the standard specification CR-Z
A hybrid sports car released in 2010, equipped with a 1.5L in-line 4-cylinder engine and a nickel-metal hydride rechargeable battery.
The mission was a double feature of the world's first 6-speed MT in a CVT and a hybrid car.
Winner of the 31st Japan Car of the Year
This ZF1 type comes in two grades, the "β" grade used as a base and the "α" grade equipped with 16-inch aluminum wheels and discharge headlights, and a wide variety of custom parts such as exclusive aero parts and wheels were prepared from Mugen.
The product is based on the ZF1 model, which debuted in 2010 and has undergone minor changes in 2012.
Three-dimensional form reminiscent of CR-X due to the unique size of 1/24 scale
A large number of the following exclusive mold parts are included to make the CR-Z (ZF1) equipped with special custom parts developed from MUGEN.
・Front under-spoiler: Mugen version spoiler integrally molded to cover all four sides of the front grill
Fog light lens is also prepared with a special mold
・Front sports grille: Parts configuration integrated with the grille mesh with special parts reminiscent of the H mark ・Grill illumination: Reproduces the front sports grille with optional white LEDs ・Side spoiler: Equipped with the same range as the actual vehicle Integrated parts that are divided and reproduced by replacing the side sill garnish ・Rear under spoiler: Special parts are prepared together with the rear bumper
Parts division at body color and black color boundary
・Rear wing: Attached to the upper end of the tailgate, it consists of three parts: the wing surface and both struts.
・Sports exhaust system: A distinctive triangular muffler is available as an exclusive part.
・Aluminum wheel GP: 17-inch forged wheel with 7 spokes, gunmetallic and bronze parts are not colored (white) ・Assist meter: Water temperature/oil temperature/oil pressure auxiliary meter with three hoods in one part transformation
・The body is integrally molded, and the front and rear bumpers are separate parts.
・The front, rear, left, and right windshields are integrated, and the rear and side windows are insets, so there is little difference from the body surface.
-The wiper is realistically reproduced with a delicate and smart thickness and size.
- Chassis is expressed with realistic and information-rich sculptures, including electrical wiring.
・The front/rear lighting fixtures are plated with silver resin.
・Even hard-to-see parts such as the brake calipers are made into three-dimensional parts.
・The inner surfaces of the front and rear light lenses are detailed with engravings for added realism.
・Transparent parts are prepared for the reflective surface of the rear reflector.
・The interior is a bathtub type integrally molded part.
・The steering wheel is delicately engraved with switches, and the Honda logo is expressed with a convex sculpture.
・The paddle shift is a separate part from the handle and is sandwiched between the stay.
・The meter panel has a realistic finish centered on the speedometer with a distinctive and deep shape.
The dashboard is expressed with delicate sculptures such as navigation and air conditioner louvers
The gap under the headrest is reproduced by one-piece molding just like the real thing.
-The luggage space is reproduced with the manufacturer's optional cargo tray installed.
・The included decals include the wheel logo and the design for the meter panel.
・The decal meter panel can be selected from two types of color tones: normal mode and SPORT mode.
・The front seat moquette has a pattern on the center part that is difficult to reproduce by painting.
・The license plate includes "Suzuka" number and "Shinagawa" after the production factory.
Nameplates for model cars are also available
・The included metal inlet includes a logo mark and car name.
can be made realistic
・Base and preparation of the hybrid logo, specifications to reproduce the letters by pasting decals on top of each other
・A masking sheet is included for black painting around the window.
Cut out according to the printed line and use
Completion size: Approximately 170 x 73 (84) x 58 mm (body width (when mirror is deployed)) 94 assembly parts [Included contents] ・Runner x 13 ・Rubber tire x 4 ・Assembly manual x 1 ・Decal x 2 ・Metal inlet x 1・Mask sticker x1 *This product is made in Japan
*This product is a plastic model kit that requires assembly.
No safety warning
Dimensions : ‎33 x 21 x 7 cm