Plastic model kit that needs to be assembled

Separate tools are required

With multicolor molding, you can enjoy painting etc. to your liking

Snap fit, no glue required

Product introduction Product introduction A completely new mold "Suzuki Jimny JB23&quot
of 1/24 scale snap-fit type car model has appeared! The product is a kit format that requires assembly

1/24 scale

No painting required: Each part is colored with a molding color, and the body realizes a glossy texture that can not be obtained by painting

No glue required: Designed to fit parts together for easy assembly

The JB23 is an off-road four-wheel drive vehicle that has been sold for 20 years from the appearance of the Type 1 in 1998 as the third generation of Jimny to the Type 10

The box-shaped style, which used to be a straight line, has been changed to a rounded shape, but the mechanism such as the rudder frame and rigid axle suspension follows the predecessor, improving off-road driving performance and on-road driving performance. Was planned

The product is modeled on the final minor change car, the 10-inch.

The product is based on the special specification car Land Venture of the JB23 series 10 type released in 2014.

It is a late model with a thicker bonnet, equipped with the side garnish and rear tire cover that are characteristic of LV.

Accurately reproduce fine modeling with the size unique to 1/24 scale

The body uses a special molding material to reproduce a level of luster that is difficult to express by painting.

The molding color consists of eight types: green, black, silver, gloss silver, clear smoke, clear, clear red, and clear orange.

Visuals that look like they are painted separately with colored parts even when assembled straight, and the parts split body that greatly reduces masking work even when painting is a box shape with a slide mold, reproducing a slightly rounded shape on the side

The front, rear, and roof are the standard structures of the NEXT series, which are laminated and fitted to body parts.

The thicker 9/10 type bonnet and front side are available as separate parts.

The bonnet intake reproduces the depth and is reproduced with separate parts

The front grille has a two-layer structure that reproduces the depth, and the radiator that fits in the back is also shaped.

The lower part has a structure in which the ladder frame part is a single part and incidental parts are attached.

The leading arm, trading arm, front and rear differential gear cases and drive shaft are three-dimensionalized as separate parts.

The headlight lens is delicately shaped like the actual car sculpture.

The headlight unit reproduces the main light bulb and small light bulb with delicate engraving, and the back of the lens is three-dimensional.

The driver / passenger seat window has a separate design of glass and frame, eliminating the need for sticker coloring and masking during painting.

The side / rear window adhesive part (black part) is expressed on the body side, and it is finished realistically by fitting the glass.

The rear glass defogger is delicately carved and expressed.

The side turn lamps and back lights express the lens with clear parts.

The structure that the turn lamp fits from the back side

The lens with integrated brake / turn signal is reproduced with a non-adhesive type that fits the clear orange parts into the brake lens.

The wiper blade is an ultra-fine molded part full of realism, and even the unevenness of the blade mounting part is engraved.

The instrument panel is three-dimensional with delicate sculpture

JB23 drive selection button type switch is also accurately shaped

The side mirrors have a two-layer structure and are color-coded.

The mirror surface is represented by the attached cutout wheel seal

The tire is a molded product of rubber resin, a special mold (new mold) is appointed, and 175 / 80R16 size on-road tires are attached

In the actual vehicle, an optional roof bar is available as a custom part.

Adhesive type

The attached sticker reproduces the coloring of details, and it is already cut out and can be easily pasted.

The sticker contains the instrument panel, logo, vehicle number, etc.

The size at the time of completion is (approx.) Overall length 150 x overall width 77 x overall height 72 mm

Number of assembled parts 111 points [Included contents]
・ Runner X18
・ Rubber material tire X4
・ Assembly manual X1
・ Seal X1 * This product is made in Japan

* This product is a plastic model kit that requires assembly.

No safety warning No safety warning
Dimension: 33 x 21 x 8 cm